First fully charge the cleaner so that the light on the power cord is green not red. You will need a wifi connection when you create an account and log in.

Note: The APP requires a WiFi connection when creating an account and for the login process. The APP requires a Bluetooth connection with your phone. Please make sure that your Bluetooth is on and connected to the APP.

Once the app is installed on your smart phone:

1. Power on the cleaner, the blue light should appear and remain ON.

2. Connect the INOPOOL APP with the cleaner while the cleaner is ON.

3. Once the connection is successful, the APP will give a "Success" prompt. At the same time, the cleaner indicator light will turn purple and remain ON.

4. Enter the APP interface, the default parameters of the cleaner will be displayed. Click on "My Pool" located in the upper right hand corner of the screen.  Set the parameters in accordance with your pool size, type, and cleaning preferences.

5. Next under the "MY POOL" screen, select "+ ADD" and complete this section.  On the "expert" mode you may choose a cleaning pattern.   

6. Press the ON/OFF button to shut OFF the cleaner.

7. Restart the cleaner by pressing the ON/OFF button. A blue light should appear. The cleaner will now execute the corresponding cleaning program in accordance with the parameters recently set. Submerge it in the pool to get most of the air bubbles out and in a few seconds (about 15-20 seconds) you’ll see it blow a big bubble out and start to perform its clean cycle.