Ruud P-D206A-EP-X Digital Polymer Pool/Spa Heater 199,500 BTU Propane Cupro-Nickel, 015006

Ruud P-D206A-EP-X Digital Polymer Pool/Spa Heater 199,500 BTU Propane Cupro-Nickel, 015006

Mfg #:
015006
|
SKU:
RUD-15-5006
|
UPC:
84089103305
$2,899.00
(No reviews yet) Write a Review

Out of stock

Out of Stock
Description

Ruud P-D206A-EP-X Digital Polymer Pool/Spa Heater; 199500 BTU; Liquid Propane; #58 Burner; Cupro-Nickel Tubing

Features

  • PolyTuf Textured Powder Coating - The Ruud gas heater has a polyester-coated, non-corrosive cabinet that is more durable than solvent-borne and waterborne-coated metal cabinets. Every piece of sheet metal goes through a 7-stage wash system, making certain the powder paint has a perfect bond. Underneath the tough, yet beautiful finish you will find galvanized metal that offers superior rust prevention and years of durable service
  • Fire Tile - A ceramic fiber combustion box keeps your heater running efficiently while keeping the outside jacket cool. By using this space-age material the heater won't retain residual heat after it is turned off, allowing it to be installed without the
  • Fuel-Efficient - Energy-smart Ruud heaters consistently achieve the highest efficiency ratings. They meet or exceed all federal and state standards
  • Wind-Resistant Design - No need for fans to combat drafting problems. This heater is designed to draft naturally in outdoor installations with its exclusive low-profile design. It is so thoughtfully and carefully designed it actually protects itself from the things that tend to stifle ordinary pool and spa heaters. It delivers uninterrupted heating performance regardless of falling leaves, wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc.
  • Polymer Headers - Prevent rust stains from harming your pool’s surface, giving you years of trouble-free swimming pleasure
  • Cupro-Nickel Finned-Tube Heat Exchanger - Single bank, straight through design delivers lowest pressure drop. Integral fins have ten times the heat transfer surface of plain tubes. Cupro-nickel tubes provide superior chemical resistance over copper for tough commercial installations
  • Stainless Steel Tube Sheet - Stainless steel tube sheets are used on all Ruud gas heaters. This allows for a completely nonferrous waterway, leaving your pool truly rust-free
  • CPVC 2 Inch Water Connections - Standard with every Ruud is a set of 2 Inch slip-fit CPVC water connections to make your installation secure and effortless
  • Condensation Protection - The Unitherm Governor helps reduce condensation from low inlet water temperatures. It automatically regulates the water flow to help keep the water temperature in the heat exchanger above 105 degree F. Both water temperature and water flow rate are controlled to eliminate condensation, sooting, and scale build-up that can shorten heater life
  • High Flow Rates - The Ruud gas heater comes with an automatic bypass built into the header. You'll find that the heater is capable of handling water flow at a rate up to 125 gpm
  • Burner Tray - Every burner tray is built to last, from the stainless steel burners to the aluminized metal used in the heat sensitive areas. Innovative design allows for the easy removal of the tray and burners for servicing

Specifications

BTUHI nput 199500
Burner Orifice Size #58
Cabinet Depth 28 Inch
Cabinet Height 38 Inch
Cabinet Width 20 Inch
Control Type Digital Electronic
Elevation 2000 - 3000 ft
Flow Rate 125 gpm
Flue Diameter 6 Inch
Frequency Rating 60 Hz
Gas Connection 3/4 Inch NPT
Gas Type Liquid Propane
Headers Polymer
Housing Finish PolyTuf Powder Coat
Indoor Drafthood 61-5/8 Inch
Item Pool/Spa Heater
Minimum J  11-7/8 Inch
Model Number P-D206A-EP-X #58
Phase 1-Phase
Stackless Outdoor Top 40 Inch
Standards Approvals ASME Certified, ANSI Z21.56/CSA 4.7
Tubing Material Cupro-Nickel
Voltage Rating 115/230 V
Water Connection 2 Inch NPT

Resources 

Related Products