Aqua Finesse SpaClean 1 Tablet, 12002677
Our AquaFinesse SpaClean tablet thoroughly cleans the pipes and interior of your spa. Even with a new spa, water often remains in the pipes because the manufacturers first test the spa before it enters the market. This often creates biofilm and limescale in the pipes before you start using the hot tub.
This is at the expense of your spa’s lifespan and the water quality. Then AquaFinesse SpaClean comes in handy. This cleans your entire spa including the piping and thus removes accumulated biofilm and lime from your pipes.
We also recommend cleaning with this AquaFinesse SpaClean tablet before changing the water. This is usually every three-four months.
Simple treatment
1. Remove the filter from the spa and make sure that all jets and air valves are open to get the best water flow.
Optional: If you have chlorine granular you can raise the chlorine level to 3-5 ppm before step 2.
This is recommended when the spa is heavily soiled
2. Dissolve the AquaFinesse SpaClean tablet in a bucket of lukewarm water (from the spa) before adding it to the spa water.
3. Activate pumps on full power for 20 minutes to allow a good flow *
Repeat the pump activation for at least 2- 3 times during the next 6-12 hours.
(Depending on the severity of the problem)
4. End the treatment with one more activation of the pumps and then empty the spa.
Rinse the spa with fresh water. (do not use any other cleaner)
5. Put the filter back in the spa and you are ready to resume or start maintenance with the AquaFinesse hot tub water treatment
* If foam appears during the cleaning process please do not touch or inhale.
