Balboa BP7 Series Control System
| 6406 |
With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems.
The BP7 Series System Can Operate:
- (1) 4 KW Stainless Steel Heater Assembly (M7 Heater Assembly Included)
- (1) Two Speed Pump 120 Volt or 240 Volt
- (1) Single Speed Pump
- (1) Blower 120 Volt or 240 Volt
- (1) Ozonator
- (1) Spa Light
(If installing a circulation pump it must run at least 23 Gallons Per Minute)
The Balboa BP7 Series Control System Includes:
- Control Pack (230 Volt Only)
- Balboa Top Side Control Panel TP600 (Jets, Menu, Light, Aux, and Temperature Up (Warm) Temperature Down (Cool) Buttons.)
- Balboa Stainless Steel Heater Assembly with M7 Flow / Temperature sensors
- Light Housing Assembly (Excludes Light Lens or Bulb) (Can operate a standard light or LED light)
- Panel Overlay
- Top Side Control Panel Adapter Plate
- Cords for Pumps, Blowers, etc. Sold Separately if Needed
BP7 Series Features and Benefits:
- 7 Relays - The BP7 has 32 different setups and can power a spa with 1-4 pumps, including MicroSilk systems
- Wi-Fi Enabled
- Supports all BP ancillary products (Control My Spa, Balboa Bluetooth Audio,
Chromozon3 and Status Pro) - Supports all TP and SpaTouch topsides
- Replaces failure-prone mechanical pressure/flow switch
- Can be plumbed to either suction or pressure side of pump
- 120/240V convertible power
- Custom plastic enclosure
- M7 flow/ temperature sensors
- Rigorously tested
- US & Canadian safety approvals
Thanks to a combination of Balboa engineering and patented M7 technology, we now offer the highest component reliability in the business with fewer returns and longer life expectancy than traditional non-M7 systems. At Balboa, innovative engineering and state-of-the-art manufacturing go hand in hand to deliver a quality, cost effective product that will provide years of reliable, headache-free service.
Patented M7 Technology Includes:
- Smart Sensor Technology
- Multiple High Limit Safety Systems
- All Safety Functions always active
- Both Sensors are Identical
- Sensors monitor each other via software to regulate spa functions
- Ensures a proper operating environment for heater element
- No Sensor Installation in spa wall
- No Pressure Switch problems
Heater Element and Tube:
- Enlarged bend radius
- No wire ties
- Minimizes debris collection
Heater Tube:
- No welds required
- Front mounted
- Easy access for service
The BP7 Series Control System Can Be Used to Replace The Following Systems:
- Balboa VS300
- Balboa VS500Z
- Balboa VS501Z
- Balboa VS501SZ
- Balboa VS503SZ
- Balboa VS504SZ
- Balboa VS510SZ
- Balboa VS510DZ
- Balboa VS511Z
- Balboa VS511SZ
- Balboa VS513Z
- Balboa VS514SZ
- Balboa VS515Z
- Balboa VS515SZ
- Balboa VS520Z
- Balboa VS520SZ
- Balboa VS520DZ
- Balboa VS525Z
- Balboa BP501G1
- Balboa BP501G2
- Balboa BP501G3
Note:
- Designed to be installed by a professional spa or hot tub technician
