Moov MI1400 Inverter Heat Pump with Variable Speed 140K BTU

Thanks to our full-inverter technology, the product adapts the speed of its compressor from 20% to 100% unlike traditional heat pumps which only operate at a single speed until they reach the desired temperature. The result? A much lower operation cost and a more accurate and durable technology. The Moov Inverter heat pump works with reversible valve defrosting. Considered to be the best way to defrost the product at low temperatures, this approach allows the product to operate in the opposite direction to its usual tendency, thus allowing accelerated defrosting to then heat better.

Specifications

• Heating Capacity: 140,000 BTU

• Pool Size Supported: Up to 42,000 gallons

• Compressor Type: Full‑inverter, variable‑speed 20%–100% modulation

• COP Efficiency: Up to 13.1 (Air 80°F / Water 80°F / Humidity 80%)

• Noise Level: ~48 dB in silent mode (extremely quiet)

• Electrical: Single‑phase 208–230V, 50A breaker

• Water Connections: 2" inlet/outlet

• Weight: ~302 lbs

• Dimensions: ~32" × 37.7" × 42" (varies slightly by seller)

• Housing: ABS composite + titanium heat exchanger (salt‑safe)

 Technology & Advantages

 Full‑Inverter Variable Speed

Adjusts compressor and fan speed from 20% to 100%, unlike single‑speed heat pumps that run full blast until setpoint is reached. Benefits:

• Lower operating cost

• Longer equipment life

• More stable water temperature

Resources

• Brochure