LaMotte Waterlink Spin Disks

Posted by Matt Fichera on Sep 28 2020

LaMotte Waterlink Spin Disks

The  WaterLink Spin Disk Series is great for public pool testing, service, or in-store water tests as well.

Spin disks are certified by the NSF/ANSI 50 mark used on water quality testing devices. The certification means that a product meets all applicable American standards for product design and performance. The NSF certification involves product testing as well as required retesting as is needed to ensure that they continuously meet all requirements for accuracy, performance, and operating range. Certification levels of L1, L2, and L3 are possible with L1 being the highest rating.

These  innovative disks do all of your pool and spa water testing for you. Each disk comes sealed and contains the exact amount of reagent that you need to run a complete series of tests. Go ahead and fill the unique reagent disk with less than 3 mL of water and all of your very important water tests are completed automatically. In either 30 or 60 seconds all of the testing is completed and results are transferred into the DataMate software, are available for print, and can be looked at as a series over time to discover water treatment trends and progress.

This advanced system of water testing that these spin disks use is the most advanced ever produced. This new technology allows pool and spa water analysts of all abilities to provide accurate results to their customers without dedicating time to individual tests and clean-up procedures. No vials to fill, no prep time, no guessing!

The  WaterLink Spin Disk used in conjunction with the The WaterLink Spin Touch photometer virtually eliminates any kind of user-error in water testing. Uses reagents and a sample that are both pre-measured as well.

LaMotte Spin Touch Reagent Disks

4328-H – Single Use Disk (Free Chlorine, Total Chlorine, Bromine, pH, Calcium Hardness, Total Alkalinity, Cyanuric Acid, Copper, Iron, Salt)

4329-H – Single Use Disk (Free Chlorine, Total Chlorine, Bromine, pH, Calcium Hardness, Total Alkalinity, Cyanuric Acid, Copper, Iron, Salt, Phosphate)

4330-H – Single Use Disk (Free Chlorine, Total Chlorine, Bromine, pH, Calcium Hardness, Total Alkalinity, Cyanuric Acid, Copper, Iron, Salt, Borate)

4334-H – 3 Use Disk (Free Chlorine, Total Chlorine, Bromine, pH)

4335-H – 3 Use Disk (Free Chlorine, Bromine, pH, Total Alkalinity)

The  Lamotte Waterlink Spin Disk series tests for the following:

Fr Chlorine: 0 to 15.0 ppm

Total Chlorine: 0 to 15.0 ppm

Bromine: 0 to 33.0 ppm

pH: 6.4 to 8.6

Calcium Hardness: 0 to 800 ppm

Total Alkalinity: 0 to 250 ppm

Cyanuric Acid: 5 to 150 ppm

Copper: 0 to 3.0 ppm

Iron: 0 to 3.0 ppm

Salt: 0 to 5000 ppm

Phosphate: 0 to 2000 ppb

Waterlink SpinTouch Brochure

Waterlink SpinTouch Quick Start Guide

Waterlink SpinTouch User Guide

Our Waterlink SpinTouch Blog

Trust Guard Security Scanned