Century(R) Centurion(R) Pro HST225 Pool and Spa Pump Motor, 1-Speed; 2.25 HP, 3450 RPM, 115/208-230 V, 56J, Threaded Shaf
Features
- Professional grade
- Hybrid end frame design: The Centurion PRO's hybrid end frame design incorporates a unique BX hole placement and new terminal board design that provides installers ample room to easily feed even larger gauge wiring through with unencumbered access
- PCB terminal board: Formed from highly durable PCB material, the larger terminal board boasts a layout that is both hand- and tool-friendly
- Voltage change device: The Centurion PRO incorporates a new voltage change plug that virtually eliminates mis-wiring errors. The new voltage change plug fits specifically to one or the other clearly defined sets of angled spade terminals on the terminal b
- Definitive shaft access: The Centurion PRO design introduces a new and clearly defined shaft access path to aid installers in identifying the proper tool and location to acquire the shaft during installation or service.
- 203 Bearings both ends
Specifications
| Ambient Temperature |
50 deg C |
| Bearing Type |
Sealed Ball |
| Brand |
Regal Beloit |
| Diameter |
6-1/2 Inch |
| Duty Cycle |
Continuous |
| Enclosure Design |
Open Dripproof |
| Frame |
56J |
| Frequency Rating |
60 Hz |
| Full Load Amps |
20.4/10.9-10.2 A |
| HP |
2.25 |
| Insulation Class |
B |
| Item |
Pool and Spa Pump Motor |
| Motor Design |
Capacitor Start/Run |
| Motor Shaft Rotation |
CCWPE |
| Motor Thermal Protection |
Auto |
| Mounting Type |
C-Face |
| Number of Speed |
1-Speed |
| Overall Length |
11.84 Inch |
| Phase |
1-Phase |
| RPM |
3450 |
| Series |
Centurion® Pro |
| Service Factor |
1.00 |
| Shaft Design |
Threaded |
| Shaft Diameter |
5/8 Inch |
| Shaft Material |
303 Stainless Steel |
| Standards Approvals |
UL Approved, CSA Certified |
| Sub Brand |
Century® |
| Thrust Horsepower |
2.25 |
| Type |
K |
| Voltage Rating |
115/208-230 V |
