CoverCare™ 02555 Magnetic Drive Pool Cover Pump with 25 ft Cord 500 gph. The pump is a magnetically driven centrifugal water pump. It has no seals to wear and contains no oil. The pump has a garden hose thread on the pump outlet. A garden hose can be used to direct the water away from the pool. Place the pump where the water is the deepest. Bear in mind that the pump cannot pull water up from a lower level unless submerged and filled with water when starting. Should the pump not start pumping, disconnect electric, wiggle hose a few times and try again. All electrical components are encapsulated in epoxy with no seals to wear or break. The energy used is approximately 1/2 of regular motor driven pumps. The prefilter is provided for use in situations where deposits in the water could clog or damage the pump. This helps give uninterrupted service.
Features:
- Magnetic Drive Motor - Only One Moving Part
- Completely Submersible
- Easily Hooks Up to Any Standard 3/4" Garden Hose Thread
- Includes Easy Clean Clog-Resistant Foam Filter
- Listed to UL Standards
- Max Output - 500 GPH (Gallons Per Hour)
- 45 Watts
Resources:
