FREE SHIPPING over $99 or $8.99 Flat Fee

Raypak BR408 Digital ASME Bronze 399,000 BTU Propane Gas Pool and Spa Heater 0-2000 Ft., 013732

Raypak BR408 Digital ASME Bronze 399,000 BTU Propane Gas Pool and Spa Heater 0-2000 Ft., 013732

Mfg #: 013732


UPC: 84089102980

No reviews yet Write a Review
Secure transaction

Free Ground Shipping on Orders Over $99

Typically Ships in 1 to 2 Business Days


Raypak B-R408A Professional Series ASME Digital Brass Pool Heater; 0-2000 ft Elevation, 399000, Liquid Propane, #57 Burner, Cupro-Nickel Tubing


  • Microprocessor - Control is more precise than mechanical systems. It controls temperatures for pool and spa settings and stores diagnostic information for service technicians
  • Robust Burner - Design is Raypak’s specialty. The Professional series heater can withstand fluctuating and varying gas pressures. The burner is self-adjusting and always yields a perfect flame
  • Stainless Steel - Is used liberally through-out the Professional series pool heater. Raypak spared no expense to ensure that any area that could be compromised by harsh environments would stand the test of time.
  • Heat Exchanger - With brass headers and cupronickel tubes for maximum protection against the toughest pool applications. Excellent for salt chlorine generated pools. ASME certified & National Board Registered
  • Burner Tray - Constructed entirely of stainless steel. Every detail has been looked at, down to every nut and bolt, and made of stainless steel. This burner tray is built to last
  • Condensation Protection - The Unitherm Governor system along with a spring loaded bypass to maintain the perfect flow through the heat exchanger
  • Spark-to-Pilot Ignition - The most reliable and safe ignition system in use today
  • Cupro-Nickel Finned-Tube Heat Exchanger - Is at the heart of the Raypak Professional series heater. The competition doesn’t stand a chance against its fat 0.065 tubing walls. Raypak also uses integral fin tube, meaning it’s all one piece of material
  • Wiring Sheath - Is standard construction on all exposed wiring. This helps prevent rodent damage and other associated issues that can damage the wiring. Not to mention it looks very clean and tight.
  • Flow Switch and T&P - Are standard equipment on the Raypak Professional. This makes the unit 50 state ASME compliant right out of the box. Also, having a flow switch eliminates pressure issues from elevated pools.


Amperage Draw 4 A at 120 V, 2 A at 240 V

BTUH Input

Burner Orifice Size #57
Cabinet Depth 28 Inch
Cabinet Height 38 Inch
Cabinet Width 29 Inch
Control Type Digital Electronic
Elevation 0 - 2000 ft
Flow Rate 125 gpm
Flue Diameter 9 Inch
Frequency Rating 60 Hz
Gas Connection 3/4 Inch NPT
Gas Type Liquid Propane
Headers Brass
Indoor Drafthood 64-1/2 Inch
Item Pool Heater
Minimum J 12-1/8 Inch
Model Number B-R408A-EP-X #57
Phase 1-Phase
Series Professional
Stackless Outdoor Top 40 Inch
Standards Approvals ASME Certified
Tubing Material Cupro-Nickel
Voltage Rating 120/240 V
Water Connection 2 Inch NPT