Pentair IntelliFlo VS+SVRS Variable Speed Pump 3 HP
The IntelliFlo VS+SVRS Variable Speed Pump was the first pump developed with an integrated Safety Vacuum Release System (SVRS). This system features a built-in controller and proprietary software designed to help detect a suction or drain blockage and automatically stop the pump to provide a layer of protection against entrapment. The IntelliFlo VS+SVRS pump complies with the current ASME A112.19.17 standard for Safety Vacuum Release Systems (SVRS)
Designed to pair with Pentair Easy Touch or IntelliTouch Automation Systems, the IntelliFlo VS+SVRS can be programmed to deliver the right flow required for filtration, water features, spas and other equipment. With the IntelliFlo VS+SVRS, you can add equipment and features, or change them, without reducing pump performance all while still providing maximum energy efficiency.
Features
- Proprietary software designed to help detect a suction or drain blockage, automatically stopping the pump
- 8 programmable speed settings and built-in timer
- New rotatable keypad for easy programming and viewing - keypad has the ability to be wall mounted with optional wall mount kit (sold separately)
- Intuitive interface/ HMI simplifies programming and use
- Top-mounted field wiring compartment for easy access and installation
- Totally-enclosed fan-cooled design (TEFC) for quiet operation
- Built-in diagnostics protect the pump for longer service life
- Interfaces perfectly with Pentair automation systems
- ENERGY STAR Certified
Standard for residential and commercial swimming pool, spa, hot tub and wading pool suction systems, as required by the Virginia Graeme baker pool and spa safety act.
Optional keypad wall mount kit part No. 356904Z
Safety Features
- Includes a built-in controller with proprietary software to detect blockage and automatically shut off in seconds
- Meets ASME A112.19.17.2002 standards, thus complying with the Virginia Graeme Baker Pool Safety Act SVRS Requirements
- No SVRS calibration required: the blockage detection/shut down function is pre-programmed into the software
- IntelliFlo VS+SVRS pump’s SVRS protection cannot be turned off
- For added safety, if the SVRS becomes disabled, the pump will not run
- Safety lock-out feature (password-protected) prevents pump speed settings from being changed by unauthorized personnel
Why slower is better
The surprising secret to minimizing pump energy costs is to operate at the lowest speed needed to accomplish a job. Even with only modest pump speed reductions, the effect on electricity usage can be dramatic. Reducing pump motor speed by 25% reduces power by 58% of what’s consumed at the higher speed.
Engineered for exceptionally long life
The IntelliFlo® VS+SVRS Pump’s permanent magnet motor produces far less heat and vibration than traditional induction motors. This not only results in less stress and wear on pump components, but on other equipment, too. Exclusive load-sensing software provides nearly instant priming which saves energy and reduces wear and tear on the pump. Plus, built-in diagnostics protect the IntelliFlo VS+SVRS pump from the most common causes of premature pump failure—loss of prime, overheating, freezing and voltage irregularities. The result is you can expect dramatically longer life and an even greater return on your investment.
Other Features
The IntelliFlo VS+SVRS pump anticipates and solves other pool operating challenges:
- Easy to program and monitor: simple push-button controls and clear LCD readouts make operation a cinch
- Ability to set minimum and maximum speeds: The IntelliFlo VS+SVRS pump will only operate within the ranges you set to help assure safer operation and long equipment life
- Built-in clock and timer: eliminates the need for an added time clock or expensive controller
