Pentair Prowler Communication Cable, 360446, KPY-201-0309, 788379882211
Used On
- Pentair Prowler 910
- Pentair Prowler 930
- Warrior SI
The Pentair Prowler Communication Cable, 360446 is a replacement cable for the Pentair Prowler 930 and Warrior SI robotic pool cleaners. It is a 60-foot cable with a swivel connector at the end.
The cable is used to connect the robotic cleaner to the caddy, which controls the cleaner. If the cable is damaged, the cleaner will not be able to communicate with the caddy and will not work properly.
The Pentair Prowler Communication Cable, 360446 is a relatively easy to replace. The old cable can be disconnected from the caddy and the new cable can be connected in its place. The new cable should be routed along the same path as the old cable to prevent it from getting damaged.
Benefits
- Replaces damaged or worn cables
- Improves communication between the cleaner and the caddy
- Easy to install
If you are experiencing problems with your Pentair Prowler 930 or Warrior SI robotic pool cleaner, the communication cable may be the problem. Replacing the communication cable is a quick and easy way to fix the problem.
Here are some of the symptoms of a bad communication cable:
- Cleaner does not respond to commands from the caddy
- Cleaner moves erratically
- Cleaner stops working altogether
If you are experiencing any of these symptoms, you may need to replace the communication cable.
